Quantcast
Channel: Ubuntu Forums - General Help
Viewing all 42709 articles
Browse latest View live
↧

dconf-service

March 27, 2018, 10:59 am
$
0
0
Hello everyone.
I use Ubuntu 16.04 on a computer with a dual-core AMD processor mounted more than eight years ago.
It will be about two weeks ago that when I start the computer it is appreciated that it is continuously accessing the hard drive and everything is very slow. Some days it behaves like this during the whole work session, others after a certain time, it is normalized. Without any open application System Monitor marks a utilization of 50-60% of CPU. With the top command you can see that dconf-service is continuously writing and Xorg and Compiz consume 10-15% of CPU usage. Today I started the computer at twelve and until three thirty has not regularized its behavior. During this time it has generated a log of more than 35 MiB. I attach the beginning and the end of syslog.
Any help is welcome.
Thank you.

Code:
Mar 27 12:01:51 jordi-desktop cgmanager[948]: cgmanager:per_ctrl_move_pid_main: pid 7604 (uid 1000 gid 1000) may not write to /run/cgmanager/fs/blkio///tasks
Mar 27 12:01:51 jordi-desktop cgmanager[948]: cgmanager:per_ctrl_move_pid_main: pid 7604 (uid 1000 gid 1000) may not write to /run/cgmanager/fs/cpu///tasks
Mar 27 12:01:51 jordi-desktop cgmanager[948]: cgmanager:per_ctrl_move_pid_main: pid 7604 (uid 1000 gid 1000) may not write to /run/cgmanager/fs/cpuset///tasks
Mar 27 12:01:51 jordi-desktop cgmanager[948]: cgmanager:per_ctrl_move_pid_main: pid 7604 (uid 1000 gid 1000) may not write to /run/cgmanager/fs/devices///tasks
Mar 27 12:01:51 jordi-desktop cgmanager[948]: cgmanager:per_ctrl_move_pid_main: pid 7604 (uid 1000 gid 1000) may not write to /run/cgmanager/fs/freezer///tasks
Mar 27 12:01:51 jordi-desktop cgmanager[948]: cgmanager:per_ctrl_move_pid_main: pid 7604 (uid 1000 gid 1000) may not write to /run/cgmanager/fs/hugetlb///tasks
Mar 27 12:01:51 jordi-desktop cgmanager[948]: cgmanager:per_ctrl_move_pid_main: pid 7604 (uid 1000 gid 1000) may not write to /run/cgmanager/fs/memory///tasks
Mar 27 12:01:51 jordi-desktop cgmanager[948]: cgmanager:per_ctrl_move_pid_main: pid 7604 (uid 1000 gid 1000) may not write to /run/cgmanager/fs/net_cls///tasks
Mar 27 12:01:51 jordi-desktop cgmanager[948]: cgmanager:per_ctrl_move_pid_main: pid 7604 (uid 1000 gid 1000) may not write to /run/cgmanager/fs/perf_event///tasks
Mar 27 12:01:51 jordi-desktop cgmanager[948]: cgmanager:per_ctrl_move_pid_main: pid 7604 (uid 1000 gid 1000) may not write to /run/cgmanager/fs/pids///tasks
Mar 27 12:01:51 jordi-desktop cgmanager[948]: cgmanager:per_ctrl_move_pid_main: pid 7604 (uid 1000 gid 1000) may not write to /run/cgmanager/fs/none,name=systemd///tasks
Mar 27 12:01:51 jordi-desktop org.freedesktop.systemd1[2098]: ** (process:7604): WARNING **: cgmanager method call org.linuxcontainers.cgmanager0_0.MovePidAbs failed: GDBus.Error:org.freedesktop.DBus.Error.InvalidArgs: invalid request.  Use G_DBUS_DEBUG=message for more info.
Mar 27 12:01:51 jordi-desktop org.freedesktop.systemd1[2098]: ** (process:7604): WARNING **: cgmanager method call org.linuxcontainers.cgmanager0_0.GetValue failed: GDBus.Error:org.freedesktop.DBus.Error.InvalidArgs: invalid request.  Use G_DBUS_DEBUG=message for more info.
Mar 27 12:01:51 jordi-desktop org.freedesktop.systemd1[2098]: ** (process:7604): WARNING **: cgmanager method call org.linuxcontainers.cgmanager0_0.SetValue failed: GDBus.Error:org.freedesktop.DBus.Error.InvalidArgs: invalid request.  Use G_DBUS_DEBUG=message for more info.
Mar 27 12:01:51 jordi-desktop org.freedesktop.systemd1[2098]: ** (process:7604): CRITICAL **: Unable to acquire bus name 'org.freedesktop.systemd1'.  Quitting.
Mar 27 12:01:52 jordi-desktop gnome-session[2276]: [dynamic] DEBUG: Got existing rate data for sensor: temp1 - rate: 0,139086, last_value 48,000000, last_time 392772448
Mar 27 12:01:52 jordi-desktop gnome-session[2276]: [dynamic] DEBUG: abs rate of change of sensor temp1: 0,199970 (t0: 47,000000, t-1: 48,000000, dv: -1,000000, dt: 5,000760)
Mar 27 12:01:52 jordi-desktop gnome-session[2276]: [dynamic] DEBUG: EWMA abs rate of change of sensor temp1: 0,151262
Mar 27 12:01:52 jordi-desktop gnome-session[2276]: [dynamic] DEBUG: Got existing rate data for sensor: Core0 Temp - rate: 0,466059, last_value 30,000000, last_time 392773255
Mar 27 12:01:52 jordi-desktop gnome-session[2276]: [dynamic] DEBUG: abs rate of change of sensor Core0 Temp: 0,799726 (t0: 26,000000, t-1: 30,000000, dv: -4,000000, dt: 5,001710)
Mar 27 12:01:52 jordi-desktop gnome-session[2276]: [dynamic] DEBUG: EWMA abs rate of change of sensor Core0 Temp: 0,532792
Mar 27 12:01:52 jordi-desktop gnome-session[2276]: [dynamic] DEBUG: Got existing rate data for sensor: Core0 Temp - rate: 0,620254, last_value 28,000000, last_time 392773399
Mar 27 12:01:52 jordi-desktop gnome-session[2276]: [dynamic] DEBUG: abs rate of change of sensor Core0 Temp: 0,999625 (t0: 23,000000, t-1: 28,000000, dv: -5,000000, dt: 5,001878)
Mar 27 12:01:52 jordi-desktop gnome-session[2276]: [dynamic] DEBUG: EWMA abs rate of change of sensor Core0 Temp:
Code:
Mar 27 15:49:07 jordi-desktop gnome-session[1780]: message repeated 2 times: [ (pcmanfm:9140): Gtk-WARNING **: Failed to set text from markup due to error parsing markup: S'ha produït un error a la línia 1: L'entitat no acaba amb un punt i coma. Segurament heu utilitzat un caràcter «&» sense intenció d'iniciar una entitat. Substituïu el caràcter «&» per &.]
Mar 27 16:17:02 jordi-desktop CRON[18307]: (root) CMD (  cd / && run-parts --report /etc/cron.hourly)
Mar 27 17:00:29 jordi-desktop systemd[1]: dev-disk-by\x2did-wwn\x2d0x5001480000000000.device: Job dev-disk-by\x2did-wwn\x2d0x5001480000000000.device/start timed out.
Mar 27 17:00:29 jordi-desktop systemd[1]: Timed out waiting for device HL-DT-ST_DVDRAM_GH24NSB0.
Mar 27 17:00:29 jordi-desktop systemd[1]: Dependency failed for /mnt/wwn-0x5001480000000000.
Mar 27 17:00:29 jordi-desktop systemd[1]: mnt-wwn\x2d0x5001480000000000.mount: Job mnt-wwn\x2d0x5001480000000000.mount/start failed with result 'dependency'.
Mar 27 17:00:29 jordi-desktop systemd[1]: dev-disk-by\x2did-wwn\x2d0x5001480000000000.device: Job dev-disk-by\x2did-wwn\x2d0x5001480000000000.device/start failed with result 'timeout'.
Mar 27 17:17:01 jordi-desktop CRON[18462]: (root) CMD (  cd / && run-parts --report /etc/cron.hourly)
Mar 27 17:20:47 jordi-desktop dhclient[1399]: DHCPREQUEST of 192.168.1.36 on eth3 to 192.168.1.1 port 67 (xid=0x28ff7680)
Mar 27 17:20:47 jordi-desktop dhclient[1399]: DHCPACK of 192.168.1.36 from 192.168.1.1
Mar 27 17:20:47 jordi-desktop NetworkManager[946]: <info>  [1522164047.6225]  address 192.168.1.36
Mar 27 17:20:47 jordi-desktop NetworkManager[946]: <info>  [1522164047.6226]  plen 24 (255.255.255.0)
Mar 27 17:20:47 jordi-desktop NetworkManager[946]: <info>  [1522164047.6227]  gateway 192.168.1.1
Mar 27 17:20:47 jordi-desktop NetworkManager[946]: <info>  [1522164047.6227]  server identifier 192.168.1.1
Mar 27 17:20:47 jordi-desktop NetworkManager[946]: <info>  [1522164047.6227]  lease time 43200
Mar 27 17:20:47 jordi-desktop NetworkManager[946]: <info>  [1522164047.6228]  hostname 'jordi-desktop'
Mar 27 17:20:47 jordi-desktop NetworkManager[946]: <info>  [1522164047.6228]  nameserver '80.58.61.250'
Mar 27 17:20:47 jordi-desktop NetworkManager[946]: <info>  [1522164047.6229]  nameserver '80.58.61.254'
Mar 27 17:20:47 jordi-desktop NetworkManager[946]: <info>  [1522164047.6229]  domain name 'homestation'
Mar 27 17:20:47 jordi-desktop NetworkManager[946]: <info>  [1522164047.6352] dhcp4 (eth3): state changed bound -> bound
Mar 27 17:20:47 jordi-desktop dbus[901]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service'
Mar 27 17:20:47 jordi-desktop systemd[1]: Starting Network Manager Script Dispatcher Service...
Mar 27 17:20:47 jordi-desktop dhclient[1399]: bound to 192.168.1.36 -- renewal in 17249 seconds.
Mar 27 17:20:47 jordi-desktop dbus[901]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Mar 27 17:20:47 jordi-desktop systemd[1]: Started Network Manager Script Dispatcher Service.
Mar 27 17:20:47 jordi-desktop nm-dispatcher: req:1 'dhcp4-change' [eth3]: new request (1 scripts)
Mar 27 17:20:47 jordi-desktop nm-dispatcher: req:1 'dhcp4-change' [eth3]: start running ordered scripts...
Mar 27 17:22:17 jordi-desktop systemd[1]: dev-disk-by\x2did-wwn\x2d0x5001480000000000.device: Job dev-disk-by\x2did-wwn\x2d0x5001480000000000.device/start timed out.
Mar 27 17:22:17 jordi-desktop systemd[1]: Timed out waiting for device HL-DT-ST_DVDRAM_GH24NSB0.
Mar 27 17:22:17 jordi-desktop systemd[1]: Dependency failed for /mnt/wwn-0x5001480000000000.
Mar 27 17:22:17 jordi-desktop systemd[1]: mnt-wwn\x2d0x5001480000000000.mount: Job mnt-wwn\x2d0x5001480000000000.mount/start failed with result 'dependency'.
Mar 27 17:22:17 jordi-desktop systemd[1]: dev-disk-by\x2did-wwn\x2d0x5001480000000000.device: Job dev-disk-by\x2did-wwn\x2d0x5001480000000000.device/start failed with result 'timeout'.
Mar 27 17:22:20 jordi-desktop gnome-session[1780]: (pcmanfm:9140): Gtk-CRITICAL **: IA__gtk_window_group_remove_window: assertion 'window->group == window_group' failed
Mar 27 17:29:07 jordi-desktop gnome-session[1780]: ** Message: x-terminal-emulator has very limited support, consider choose another terminal
↧
Search

Files for TF700T ubuntu install, please help! :-)

March 27, 2018, 11:02 am
$
0
0
I am looking to improve my old Transformer Infinity Pad TF700T and I have found that you can upload:

tf700-rootfs-0.7.1.tar.lzma (667Mb) and boot_installer-0.7.1.1.zip (11 Mb)

To your tablet and boot through recovery to get Ubuntu 12.x on the tablet speeding it up.

Simple enough and I have seen several Videos that shows a succesfull update, but all the links to these files are stale.

So can anybody help find these files so that I can get my tablet fast again? :-)
↧
↧

[ubuntu] postgresql initdb where should I put data directory

March 27, 2018, 11:06 am
$
0
0
User: Sherman
Platform: HP Compaq 6710b
Operating System: Ubuntu 17.10
postgresql: 10

I just installed postgresql 10 using add-apt and apt-get. When I start initdb it asks for a data directory. Where do you put your data directory? Do I really need to perform initdb?

Thank you;

Sherman
↧

Raid 1 -advice/help please

March 27, 2018, 11:07 am
$
0
0
:) Hi and thanks in advance for anyone's input.

Firstly I hope this is in the correct part of the forum, so please excuse if not.

I am trying set up my system with Raid 1 in 16.04 - although I am no expert or indeed
have much knowledge on the subject, so please bear with me.

I have two (2) Hdd's of 500Gb each, with partitions on both drives.
Have downloaded #mdadm and installed it.

From the command line, when I go too create md0 which most guides and instructions
recommend to use, I get the following output:-

'/dev/ sda /dev/sdb is busy (this is shortened version of the output)

My questions are as follows:-
1) Do both Hdd's have to be empty to setup raid
2) Have I to use a 'Live' CD version to attempt the raid
3) There is raid in the Bios - do I have to do anything there - most say do raid via software

If any of the above makes sense to anyone and they could guide me in the right direction,
then it would be much appreciated.

As I said, I am no expert on Linux, but can do a few things at the command line which
hopefully may be of some use.

Thank you for taking the time to look at my problem, and thank your for any input forth coming.

Regards - Dee


.
↧

Problem with boot manager

March 27, 2018, 11:30 am
$
0
0
Hello.

I have installed Windows, after that I have installed Ubuntu. I logged in to Ubuntu, everything was ok. Then I logged in to Windows and after that Ubuntu boot manager was gone, I couldn't get into Ubuntu. In order to fix this, I clicked something stupid in Windows like "Solve problems with booting" which probably made the situation worse. I can't boot to Ubuntu, it automatically loads Windows. I can't even go to Bios because Windows is so stupid.

I created something like this with Ubuntu Boot-Repair. They told me to share it with you:

http://paste.ubuntu.com/p/HHrRvZ74Gk/

Are you able to tell me what I should do to fix this basing on this?
↧
↧

[ubuntu] pia cannot connect

March 27, 2018, 1:15 pm
$
0
0
ubuntu 116.04.4


My pia is connecting forever. I submitted a request to fix it. The reply was of no help at all. I could not get by the 'disconnect' after pressing the icon (orange, the disconnect button does not disconnect). Since this is a new installation, v78, I have not connected and have nothing to create a new vpn connection I am, basically, screwed.

My hope is that I can get some help here. I think I will also post this on the ubuntu forum just in case.
I have one log: https://pastebin.com/bfWuxUZD

I have been running with pia for years with no problem then, suddenly, the thing could not connect. I thought I would get some help from pia but, sofar, nothing useful.

Any thoughts on this one would be appreciated.

thank you.....................
↧

Something eating up CPU time

March 27, 2018, 2:57 pm
$
0
0
This started about a week ago - something running in the background is sucking up CPU time, continually slowing the computer to at least a crawl, if not stopping everything on the screen from 30 seconds to a minute or more.

How do i find what the problem is and fix it?
↧

[ubuntu] Installing Brother printer drivers in 16.04

March 27, 2018, 3:42 pm
$
0
0
I'm using Ubutu 16.04LTS. I have a new Brother MFC-J985DW. After some searching, phone calls and hair pulling, I got Brother to give me their link to the drivers. Here's the link to Brother's site: http://support.brother.com/g/s/id/li...rect=on#f00104.

Their instructions for installing the drivers hasn't worked. I can't find support in 16.04 for the 'superuser' Brother mentions, but tried to create a superuser with: "su -l". But after entering the password (and one different from my usual one), I got "authentification failure." I'm wary of going further with superuser, as I understand "sudo" should get me authority to make the changes, and I'd probably do some damage anyway.

Following Brother's instructions I get:

>ira@ira:~/Downloads$ sudo su gunzip linux-brprinter-installer-2.2.0-1.gz
>No passwd entry for user 'gunzip'

Trying without "su" I get:

>ira@ira:~/Downloads$ sudo gunzip linux-brprinter-installer-2.2.0-1.gz
>[sudo] password for ira:
>gzip: linux-brprinter-installer-2.2.0-1.gz: No such file or directory

Any help would be greatly appreciated. Thanks.
↧
Search

[SOLVED] Weird - only some programs wont run

March 27, 2018, 6:35 pm
$
0
0
The weirdest thing is happening. When I boot the computer all seems fine. But only some programs will run.

I can run my text editor (Sublime Text)
I can run gimp

I can't run evince, or firefox, or whatever program is the default for looking at pictures.

I booted the computer via a usb with an old version of linux.

Then I unmounted my big harddrive (with the problems).
Then I ran
fsck -yvfM
which reported no errors

I have no idea what to try next. I hope I haven't been subject to some strange rootkit exploit.

My system is Linux Mint 18
↧
↧

customize gnome title bar drop down menu (not sure what that menu is called)

March 27, 2018, 9:23 pm
↧

Changing my version of Python?

March 27, 2018, 11:41 pm
$
0
0
Im pretty new with linux, so i hope you guys bare with me.
So when i try to run this python program, i get a syntax error on line 403:
Code:
def get_data(self, (maxcol,maxrow)):
And im guessing that this syntax is illegal in 3.6, (my current version)
So im trying to figure a way where i can use 2.7 or an earlier version where the syntax above would be accepted.
Is it propper to change the symbolic link for "python" in my /usr/bin/ directory to use an earlier version then python3?

Thanks.
↧

Boot errors

March 28, 2018, 1:55 am
$
0
0
Hey.My pc is booting really slow, can we fix it somehow?

I did journalctl -b into this file:

https://pastebin.com/fBtJYcwY


Code:
#lshw -short :

H/W path                  Device          Class          Description
======================================================================
                                            system        MS-7728 (To be filled by O.E.M.)
/0                                          bus            MS-7728
/0/0                                        memory        64KiB BIOS
/0/4                                        processor      Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz
/0/4/5                                      memory        32KiB L1 cache
/0/4/6                                      memory        256KiB L2 cache
/0/4/7                                      memory        3MiB L3 cache
/0/2a                                      memory        6GiB System Memory
/0/2a/0                                    memory        2GiB DIMM DDR3 Synchronous 1333 MHz (0,8 ns)
/0/2a/1                                    memory        4GiB DIMM DDR3 Synchronous 1333 MHz (0,8 ns)
/0/100                                      bridge        2nd Generation Core Processor Family DRAM Controller
/0/100/1                                    bridge        Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port
/0/100/1/0                                  display        GM107 [GeForce GTX 750 Ti]
/0/100/1/0.1                                multimedia    NVIDIA Corporation
/0/100/16                                  communication  6 Series/C200 Series Chipset Family MEI Controller #1
/0/100/1a                                  bus            6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2
/0/100/1a/1                usb1            bus            EHCI Host Controller
/0/100/1a/1/1                              bus            Integrated Rate Matching Hub
/0/100/1a/1/1/1                            multimedia    USB Audio CODEC
/0/100/1a/1/1/2                            input          USB Keyboard
/0/100/1b                                  multimedia    6 Series/C200 Series Chipset Family High Definition Audio Controller
/0/100/1c                                  bridge        6 Series/C200 Series Chipset Family PCI Express Root Port 1
/0/100/1c.4                                bridge        6 Series/C200 Series Chipset Family PCI Express Root Port 5
/0/100/1c.4/0                              bus            ASM1042 SuperSpeed USB Host Controller
/0/100/1c.4/0/0            usb3            bus            xHCI Host Controller
/0/100/1c.4/0/1            usb4            bus            xHCI Host Controller
/0/100/1c.5                                bridge        6 Series/C200 Series Chipset Family PCI Express Root Port 6
/0/100/1c.5/0              enp4s0          network        RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
/0/100/1d                                  bus            6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1
/0/100/1d/1                usb2            bus            EHCI Host Controller
/0/100/1d/1/1                              bus            Integrated Rate Matching Hub
/0/100/1d/1/1/1                            generic        802.11 n WLAN
/0/100/1d/1/1/2                            input          USB Device
/0/100/1d/1/1/5            scsi6            storage        USB to S-ATA
/0/100/1d/1/1/5/0.0.0      /dev/sdc        disk          500GB SCSI Disk
/0/100/1d/1/1/5/0.0.0/1    /dev/sdc1        volume        46GiB EXT4 volume
/0/100/1d/1/1/5/0.0.0/2    /dev/sdc2        volume        7628MiB Linux swap volume
/0/100/1d/1/1/5/0.0.0/3    /dev/sdc3        volume        477MiB Windows FAT volume
/0/100/1d/1/1/5/0.0.0/4    /dev/sdc4        volume        411GiB Extended partition
/0/100/1d/1/1/5/0.0.0/4/5  /dev/sdc5        volume        186GiB EXT4 volume
/0/100/1d/1/1/5/0.0.0/4/6  /dev/sdc6        volume        49GiB HPFS/NTFS partition
/0/100/1d/1/1/5/0.0.0/4/7  /dev/sdc7        volume        27GiB EXT4 volume
/0/100/1d/1/1/5/0.0.0/4/8  /dev/sdc8        volume        3838MiB Linux swap volume
/0/100/1d/1/1/5/0.0.0/4/9  /dev/sdc9        volume        95GiB Linux filesystem partition
/0/100/1d/1/1/5/0.0.0/4/a  /dev/sdc10      volume        48GiB EXT4 volume
/0/100/1d/1/1/6            scsi7            storage        Mass Storage
/0/100/1d/1/1/6/0.0.0      /dev/sdd        disk          4027MB Flash Disk
/0/100/1d/1/1/6/0.0.0/0    /dev/sdd        disk          4027MB
/0/100/1d/1/1/6/0.0.0/0/2  /dev/sdd2        volume        64MiB Windows FAT volume
/0/100/1f                                  bridge        H61 Express Chipset Family LPC Controller
/0/100/1f.2                                storage        6 Series/C200 Series Chipset Family SATA AHCI Controller
/0/100/1f.3                                bus            6 Series/C200 Series Chipset Family SMBus Controller
/0/1                      scsi0            storage       
/0/1/0.0.0                /dev/sda        disk          500GB WDC WD5000AAKX-0
/0/1/0.0.0/1              /dev/sda1        volume        699MiB Windows FAT volume
/0/1/0.0.0/2              /dev/sda2        volume        397GiB Windows NTFS volume
/0/1/0.0.0/3              /dev/sda3        volume        58GiB EXT4 volume
/0/1/0.0.0/4              /dev/sda4        volume        9000MiB Linux swap volume
/0/2                      scsi1            storage       
/0/2/0.0.0                /dev/sdb        disk          80GB SAMSUNG SP0812C
/0/2/0.0.0/1              /dev/sdb1        volume        350MiB Windows NTFS volume
/0/2/0.0.0/2              /dev/sdb2        volume        73GiB Windows NTFS volume
/0/2/0.0.0/3              /dev/sdb3        volume        848MiB Windows NTFS volume
/1                                          power          To Be Filled By O.E.M.
/2                                          power          To Be Filled By O.E.M.
/3                        wlx00e45c09429a  network        Wireless interface
Code:
$ uname -a
Linux android 4.13.0-37-generic #42-Ubuntu SMP Wed Mar 7 14:13:23 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux
If anybody can help me with this one I would be happy!
↧

exFAT free space bitmap corruption

March 28, 2018, 9:04 am
$
0
0
I'm wondering if anyone else is experiencing / suffering from repeated exFAT free space bitmap corruption?

Volumes are losing disk space, it's marked as being used even, if it's not allocated to files. Afaik, this is due to free space bitmap corruption. Running chkdsk on Windows does fix this issue. But is there any sane work way to deal with this when using Linux?

In case when the amount of lost disk space gets too ridiculous. Currently I fix the problem by just copying files from volume, formatting the drive / volume again and copying files back.

Does anyone know, if there are any plans to improve fsck.exfat / exfatfsck?
↧
↧

[ubuntu] sudo is not working after libpam update

March 28, 2018, 9:47 am
$
0
0
Hi,
I am using Ubuntu 10.04. I know it is too old, but I have to use this version for some reasons.
I want to update libpam version to 1.2.1. So I followed following tutorial from linuxfromscratch for update this lib. http://www.linuxfromscratch.org/blfs...linux-pam.html
After all, I can take root permission by using su. But when I try to run sudo, I get following error every time :
Sorry, try again.
Sorry, try again.
Sorry, try again.
sudo: 3 incorrect password attempts

And this is my /etc/pam.d/sudo file :
#%PAM-1.0

@include common-auth
@include common-account

session required pam_permit.so
session required pam_limits.so

Also here is /var/log/auth.log :
Mar 28 19:45:31 sarslan-laptop sudo: PAM (sudo) illegal module type: @include
Mar 28 19:45:31 sarslan-laptop sudo: PAM pam_parse: expecting return value; [...common-auth]
Mar 28 19:45:31 sarslan-laptop sudo: PAM (sudo) no module name supplied
Mar 28 19:45:31 sarslan-laptop sudo: PAM (sudo) illegal module type: @include
Mar 28 19:45:31 sarslan-laptop sudo: PAM pam_parse: expecting return value; [...common-account]
Mar 28 19:45:31 sarslan-laptop sudo: PAM (sudo) no module name supplied
Mar 28 19:45:31 sarslan-laptop sudo: sarslan : 3 incorrect password attempts ; TTY=pts/2 ; PWD=/etc/pam.d ; USER=root ; COMMAND=/bin/bash

Also ı add my user to root group. And this is not solved problem.

So I cant figure out what is my problem. Could you help me ?
Thanks and Best Regards
↧

[ubuntu] HaCi - IP Address Administration

March 28, 2018, 10:08 am
$
0
0
Hello,

I am attempting to install HaCi onto my ubuntu server and appear to be having issues. I followed the install guide from http://haci.larsux.de/wiki/HaCiInstall but it does not help. I am wondering if anyone here knows of or can guide me through setting this up. I have created the MYSQL database and installed apache2. Downloaded the HaCi package moved it to the proper directory and when i enter the command
Code:
sudo a2ensite haci.conf
it tells me bascially to reload apache, when i do it i get an error which after looking at the logs says that there is an error in my .conf file on line 9. i checked line 9
Code:
SetHandler    perl-script
i verified that perl is installed but do not know where to go from here.

Any help would be appreciated.
↧
Search

Simple scan multiple page issue - Canon mf244dw

March 28, 2018, 10:21 am
$
0
0
Hello,

When scanning multiple pages from a Canon mf244dw via the LAN I only get the first page scanned, then an error message.

Running "simple-scan -d" and looking at the output I see the following:

Code:
[+123.87s] DEBUG: scanner.vala:1321: sane_read (7651) -> (SANE_STATUS_CANCELLED, 0)
[+123.87s] WARNING: scanner.vala:1337: Unable to read frame from device: Operation was cancelled
[+123.87s] DEBUG: scanner.vala:768: sane_cancel ()
[+123.87s] DEBUG: scanner.vala:771: sane_close ()
I do notice that the scanner is already feeding in the second page before the first page has completely rendered on screen - perhaps it's going too fast?

Thanks
↧

network printer only appears when turned on

March 28, 2018, 10:48 am
$
0
0
Hi,

I recently updated to Ubuntu 17.10.

I am using a Lexmark MS610dn network printer. But if I want to print something the printer only shows up (in Libreoffice, e.g....) when it is already turned on. This is annoying as the printer is on another floor.

With my old install, Ubuntu 16.04.3 the printer was always available to send documents to, even when it was turned off.

Anybody any ideas how to make the printer permanently available?
↧
↧

I ruined my mum's PC

March 28, 2018, 1:16 pm
$
0
0
Hello,

I tried to dual boot Ubuntu 16 LTS alongside Win 10 Pro but now Windows 10 won't work. When I try to load Win 10, it just goes to the blue repair screen. When I try to repair, it fails. When I try to restore an earlier version, it fails. So I tried to access my mum's important files via Ubuntu, but I get this message:

Error mounting /dev/sda2 at /media/ubuntu4dmin/DABE2832BE280999: Command-line `mount -t "ntfs" -o "uhelper=udisks2,nodev,nosuid,uid=1000,gid=100 0" "/dev/sda2" "/media/ubuntu4dmin/DABE2832BE280999"' exited with non-zero exit status 18: Failed to open ntfs attribute: No such file or directory
Failed to load $MFT: No such file or directory
Failed to mount '/dev/sda2': No such file or directory

How can I fix this? My mums files are the most important, not Windows 10. However, If I am able to get Win 10 and the files, that's better.
↧

Open Source Inventory Web Based system that uses QR or Barcodes you would recommend

March 28, 2018, 4:45 pm
$
0
0
Hello,

I'm searching for a web based inventory system with the following requirements:

  1. Locally hosted Free or Open Source Inventory sysetms for our small office supplies.
  2. Web Based
  3. Has the ability for us to input and use either QR Codes or Barcodes.
  4. Ideally I think it would be useful to be able to scan a QR code from our phone and have the webpage open up so we can input the number of items we are removing from stock so our inventory will be updated.


Does anyone have an inventory system they would like to recommend?

Thank you.
↧

[UbuntuGnome] unable to move cursor in grub (16.04)

March 28, 2018, 7:03 pm
$
0
0
For no obvious reason I find that I can not move around the grub on startup.

As the computer enters the grub stage on startup the usb keyboard light goes off. This means I can not access repair mode in the grub. The direction keys do not work. Probably the keyboard is not active. Once the boot routine goes beyond the grub options the keyboard comes on again.

uname -r
4.14.30-xanmod27

I want to fsck on my system partition from within repair mode of the grub.

How do I correct the keyboard failing just for during the grub phase of the boot.


Robin
↧
Viewing all 42709 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>